Can You Cancel Unconfirmed Bitcoin Transactions? Yes, Here ...

Day 4: I will repost this guide daily until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. ARE YOU PART OF THE SOLUTION? News: Unconfirmed TX's @ 174K, more exchanges adding SegWit, Core prioritizes SegWit GUI

NOTE Just a daily repost because original OP Bastiat seems to be offline (due to holidays I guess). However, this is quite important as I see much misinformation on which exchanges use segwit or not. Please upvote for awareness.
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
There are 2 different Segwit address formats.
  • p2sh - starting with a "3..."
  • bech32 - starting "bc1..."
Not many wallets/exchanges support bech32 yet and will claim the address is invalid if you try to send to it. bech32 ("native Segwit") is a mildly better solution compared to p2sh.
Exchange Batching Status Segwit (p2sh) Send to bech32
Binance Yes No No
Bitfinex Yes No No
Bitonic ? No No
Bitstamp Yes Yes No
Bittrex Yes ? ?
Coinbase/GDAX No No No
Gemini No No No
HitBTC Yes Yes ?
Huboi ? ? ?
Kraken No Yes ?
LocalBitcoins No ? ?
OKEx ? ? ?
Poloniex ? Yes ?
QuadrigaCX Yes Yes ?
Shapeshift Yes No No
Source 1
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Transaction if the sending address is a SegWit address.
    Source
So what address can I send to safely, there is so much confusion?
  • As of right now...
Non-Segwit Transactions
non-Segwit address to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) No (no support for them yet)
Segwit Transactions
3... address (Segwit) to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) No (no support for them yet)
bc1... address (Segwit) to…
non-Segwit address OK
3..... (Segwit) OK
bc1.... (Segwit) OK
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by psycongoroo to Bitcoin [link] [comments]

Day 5: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. User demand from this community can help lead to some big changes. Have you joined the /r/Bitcoin SegWit effort?

SUMMARY
Segregrated Witness (SegWit) was activated on the Bitcoin network August 24, 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work. If users demand SegWit now it will temporarily releive the transaction backlog while bigger solutions like Lightning are developed.
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ? Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1
Source 2
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Bitonic batching status updated to 'Yes'
submitted by Bastiat to Bitcoin [link] [comments]

Day 3: I will repost this guide daily until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. ARE YOU PART OF THE SOLUTION? News: Unconfirmed TX's @ 274K, more exchanges adding SegWit, Core prioritizes SegWit GUI

BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance ? NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ?
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Ready Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1(https://web.archive.org/web/20171212214514/https://bitcoincore.org/en/SegWit_adoption/)
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Updated Segwit Exchange Status for Binance and HitBTC
submitted by Bastiat to Bitcoin [link] [comments]

Day 9: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. Have you done your part?

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that this is an important data point that indicates if just a few major exchanges would deploy SegWit the high fees bitcoin is experiencing would be eliminated.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 7: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Do you want low tx fees, because this is how you get low tx fees

TL/DR
Bitcoin users can help lower transaction fees and improve bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 8: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. BTC Core SegWit GUI coming May 1, Coinbase incompetence exposed, more exchanges deploy SegWit

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that the high fees bitcoin is experiencing could be easily addressed and need not exist.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

I'm trying to put together a list of what's coming out this year. Have this very simple list so far. Anyone care to add anything or suggest some better dates?

Latest News (most recent first) - Instant channels enable safe Lightning payments with unconfirmed funding Beta - Feb 10, 2019 - Voyager, New trading app from Uber & E-Trade execs announce launch date - Feb 9, 2019 - bumi/blockstream_satellite ruby gem for the Blockstream Satellite API - Feb 8, 2019 - New Zap Desktop 0.3.4 is out. New features, massive performance - Feb 8, 2019 - New release: @lightning desktop app v0.4.0-alpha - Feb 8, 2019 - valerio-vaccaro/Liquid-dashboard - Feb 7, 2019 - Japanese SBI Holdings will allow trading of coins - March 2019 - lnd v0.5.2-beta released - Feb 6, 2019 - Koala studios launches online LN gaming platform - Feb 6, 2019 - Independent Reserve has become the first #crypto exchange in Australia to be insured, with coverage underwritten by Lloyd's of London. - Feb 6, 2019 - Coinbase announces BTC support for their mobile (keep your own keys) wallet - Feb 6, 2019 - Blockstream published a new open source Proof of Reserves tool. - Feb 5, 2019 - RTL release v0.1.14-alpha - Feb 5, 2019 - dr-orlovsky/typhon-spec spec for new trestles side chain published - Feb 5, 2019 - Payment requests coming soon to BTCPay. - Feb 5th, 2019 - Kraken Acquires Futures Startup In Deal Worth At Least $100 Million - Feb 5th, 2019 - Next Blockchain cruise scheduled for June 9-13 - Feb 4, 2019 - Work on a GoTenna plugin to Electrum wallet in progress - Feb 4, 2019 - Bitcoin Candy Dispensers being open sourced - Feb 4, 2019 - New release of JoinMarket v0.5.3 - Feb 4, 2019 - Prime Trust won’t charge its clients to custody digital assets any longer. - Feb 4, 2019 - nodogsplash/nodogsplash wifi access using LN - Feb 3, 2019 - @tippin_me Receive tips using Lightning Network adds message feature - Feb 3, 2019 - Bitcoin-for-Taxes Bill in NH Unanimously Approved by House Subcommittee - Feb 3, 2019 - Full support for native segwit merged into bitcoinj - Feb 3, 2019 - Bitfury is partnering with financial services firm Final Frontier! - Feb 2, 2019 - Now you can open #LightningNetwork channels in @LightningJoule - Feb 2, 2019 - Integrating Blockstream’s Liquid payments on SideShift AI - Feb 1, 2019 - Wyoming legislature passes bill to recognize cryptocurrency as money - Feb 1, 2019 - Casa is open sourcing the code for the Casa Node - Feb 1, 2019 - Casa Browser Extension released - v0.5.2-beta-rc6 of lnd, full release getting very close now - Feb 1, 2019 - Tallycoin adds subscriptions and paywall features in bid to rival Patreon - Jan 31, 2019 - Static channel backup PR merged into LN - Jan 31, 2019 - The NYDFS grants another Bitlicense to ATM operator - Jan 31, 2019 - @pwuille currently proposing the “MiniScript” language to describe BTC output locking conditions for practical composition - Jan 31, 2019 - Fidelity is in the “final testing” phase for its new digital asset business - Jan 31, 2019 - Hardware wallet PR #109 just got merged so that @Trezor no longer requires user interaction for PIN - Jan 31, 2019 - CBOE, VanEck & SolidX filed a new & improved bitcoin ETF proposal. - Jan 31, 2019 - Casa Node code is now open sourced - Jan 31, 2019 - Next Bitoin halving in roughly 497 days - Jan 31, 2019 - BTCPay released 1.0.3.53 - Jan 31, 2019 - @binance now lets users purchase cryptos using Visa and Mastercard credit. - Jan 31, 2019 - Bitfury to Launch Bitcoin Operations in Paraguay - Jan 31, 2019 - Coinbase introduces very generous affiliate program - Jan 30, 2019 - DOJO Trusted Node bitcoin full node. Coming Early 2019 - Jan 30, 2019 - FastBitcoins.com Enables Cash-for-Bitcoin Exchange Via the Lightning Network - Jan 30, 2019 - TD Ameritrade says clients want cryptocurrency investment options - company plans major announcement in 'first half of 2019' - Jan 30, 2019 - Storage component of Fidelity's @DigitalAssets live, with some assets under management, @nikhileshde - Jan 29, 2019 - lightning mainnet has reached 600 BTC capacity - Jan 29, 2019 - Drivechain shows picture of Grin side chain and suggests might be ready in 2 month - Jan 29, 2019 - Lightning labs iOS neutrino wallet in testing stage now - Jan 29, 2019 - Aliant offering cryptocurrency processing free-of-charge - Jan 29, 2019 - Chainstone’s Regulator product to manage assets on the way - Jan 29, 2019 - Fidelity Investments’ new crypto custody service may officially launch in March. - Jan 29, 2019 - Gemini's becomes FIRST crypto EXCHANGE and CUSTODIAN to complete a SOC 2 Review by Deloitte - Jan 29, 2019 - Iran has lifted the ban on Bitcoin and cryptocurrency - Jan 29, 2019 - Confidential Transactions being added into Litecoin announcement - Jan 28, 2019 - http://FastBitcoins.com Enables Cash-for-Bitcoin Exchange Via the Lightning Network - Jan 28, 2019 - Germany’s largest online food delivery platform now accepts btc - Jan 27, 2019 - Launching a Bitcoin Developers School in Switzerland - Jan 27, 2019 - RTL release v0.1.13-alpha Lightning Build repository released - Jan 27, 2019 - The first pay-per-page fantasy novel available to Lightning Network. - Jan 27, 2019 - Numerous tools become available to write messages transmitted with Blockstream Satellite - Jan 26, 2019; - BTCPay 1.0.3.47 released - Jan 26,2019 - WordPress + WooCommerce + BTCPay Plugin is now live - Jan 25, 2019 - Juan Guaido has been promoting #Bitcoin since 2014 is new interim president of Venezuela - Jan 25, 2019 - Morgan Creek funds @RealBlocks - Jan 25, 2019 - Coinbase integrates TurboTax - Jan 25, 2019 - Robinhood received Bitlicense - Jan 25, 2019 - Anchor Labs launches custody - Jan 25, 2019 - NYSE Arca files w/ @BitwiseInvest for BTC ETF approval - Jan 25, 2019 - South Korea, Seoul, Busan & Jeju Island currently working to create pro crypto economic zones. - Jan 25, 2019 - valerio-vaccaro/Liquid-dashboard - Jan 25, 2019 - Bermuda to launch crypto friendly bank - Jan 25, 2019 - Mobile Bitcoin Wallet BRD Raises $15 Million, Plans for Expansion in Asia - Jan 25, 2019 - BullBitcoin rolling out alpha access of platform - Jan 25, 2019 - Electrum Wallet Release 3.3.3 - Jan 25, 2019 - Bitrefill, purchase Bitcoin and have it delivered directly over LN - Jan 25, 2019 - South Korean crypto exchange Bithumb looking to go public in USA - Jan 24, 2019 - Bitcoin Exchanges Don’t Need Money Transmitter Licenses in Pennsylvania - Jan 24, 2019 - US; New Hampshire Bill Aims to Legalize Bitcoin for State Payments in 2020 - Jan 24, 2019 - Robinhood, LibertyX Receive Licenses from New York Regulators - Jan 24, 2019 - Bakkt Bitcoin futures contract details released - Jan 24, 2019 - Blockstream CryptoFeed V3 now includes 30+ venues and 200M+ updates per day - Jan 24, 2019 - Binance Jersey – The Latest Binance European Exchange - Jan 2019
Commit Activity
Nodes and Market Dominance
Bitcoin
Financial
Lightning:
ASIC Miners:
Will update this section when I hear new developments
Wallets:
Hardware wallets:
LN
LN Apps:
LN Extensions / Launchers
LN Desktop wallets:
LN Mobile wallets:
LN Network:
LN Nodes:
LN Plugins:
LN Services:
Liquid Network
Rgulatory:
Exchanges:
Payments:
Please comment if you have any ideas on dates. Many of these dates are placeholders waiting for me to update. If you comment then I will update the post.
submitted by kolinHall to Bitcoin [link] [comments]

Day 6: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Refer a friend to SegWit today. There's no $10 referral offer, but you'll both get lower fees and help strengthen the BTC protocol

TL/DR
Bitcoin users can help lower transaction fees and contribute to bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
  • Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 7: I will post this guide regularly until available solutions like SegWit & order batching ar...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7ojt5f
The original post's content was as follows:
TL/DR
Bitcoin users can help lower transaction fees and improve bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 4: I will repost this guide daily until available solutions like SegWit & order batching are ...

The following post by psycongoroo is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7m6zd0
The original post's content was as follows:
NOTE Just a daily repost because original OP Bastiat seems to be offline (due to holidays I guess). However, this is quite important as I see much misinformation on which exchanges use segwit or not. Please upvote for awareness.
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance ? NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ?
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Ready Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1(https://web.archive.org/web/20171212214514/https://bitcoincore.org/en/SegWit_adoption/)
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 3: I will repost this guide daily until available solutions like SegWit & order batching are ...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7ljpf5
The original post's content was as follows:
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make it happen. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin
IMPORTANT NOTE: The mempool is currently overflowing. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance ? NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ?
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Ready Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1(https://web.archive.org/web/20171212214514/https://bitcoincore.org/en/SegWit_adoption/)
Source 2
WALLETS
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Updated Segwit Exchange Status for Binance and HitBTC
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 9: I will post this guide regularly until available solutions like SegWit, order batching, an...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7rrb3w
The original post's content was as follows:
BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that this is an important data point that indicates if just a few major exchanges would deploy SegWit the high fees bitcoin is experiencing would be eliminated.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
...
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 8: I will post this guide regularly until available solutions like SegWit & order batching ar...

The following post by Darknicks is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7p9b1t
The original post's content was as follows:
Since Bastiat hasn't posted this for the past 2 days, I would like to post it because it's necessary.
TL/DR
Bitcoin users can help lower transaction fees and improve Bitcoin by switching to SegWit addresses and encourage wallets and exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous Bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If Bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all Bitcoin users to individually contribute to help strengthen and improve the Bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing Bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand Bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of Bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to Bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing Bitcoin through non-SegWit ready exchanges that are harming Bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use Bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your Bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your Bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
Where can I get a fee estimate for a SegWit transaction?
How can I get a SegWit address from my Bitcoin Core wallet?
  • Currently, Bitcoin Core hasn't implemented a way to get a SegWit address using the GUI. But you can get a receiving SegWit address using the debug console. To do it, go to the "Receive" tab and copy a receiving address (it starts with 1). Then just click Help > Debug window > Console and type: addwitnessaddress addr
  • You should replace addr with the receiving address that you just copied. Tap enter and you'll get an address (starts with 3). This is your SegWit address. You can use this one to receive funds. When you spend from this address, it will be a SegWit transaction. Easy huh?
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines Bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my Bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.5 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending...
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 6: I will post this guide regularly until available solutions like SegWit & order batching ar...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7na2xb
The original post's content was as follows:
TL/DR
Bitcoin users can help lower transaction fees and contribute to bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
  • Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much...
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

BlockChain Unconfirmed Transaction Script Updated  New Script 08, March 2020 Bitcoin Fees and Unconfirmed Transactions - Complete ... ✅ NEW UPDATE ✅ New Blockchain Software Bypass Unconfirmed Transactions 2020 What is BEP2 in binance withdrwal ? - CRYPTOVEL how to confirm btc ( bitcoin ) unconfirmed transaction ... Sicheres Bitcoin Wallet erstellen - Schritt-für-Schritt ... Blockchain  Hack Script 2020 GENERATES Unlimited 100% ... Introduction to Bitcoin: How to send and receive Bitcoin ... Electrum Bitcoin Wallet - Versatile and Feature Rich - YouTube Earn Free Bitcoin With Blockchain Unconfirmed Transaction Generator 2020

If you already keep bitcoin on an exchange or elsewhere, you may now transfer those funds into your Electrum wallet. If you do, a very small transfer is recommended. Expect to make mistakes when learning Electrum, especially if you’re new to Bitcoin. It’s far better to take your lumps when dealing with chump change than when your life savings is on the line. How to cancel an unconfirmed Bitcoin transaction. When sending Bitcoin, it can be easy to make a small mistake causing you to want to cancel your Bitcoin transaction.Oftentimes, funds can become stuck if the miner fee you enter isn’t high enough for any miner to confirm your transaction. Electrum ist eine leichtgewichtige Bitcoin-Wallet für Mac, Linux und Windows. Electrum wurde im November 2011 entwickelt. Die Hauptfunktionen von Electrum sind: Support für Hardware-Wallets (wie z.B. TREZOR, Ledger Nano und KeepKey) und eine sichere Bitcoin-Speicherung durch die Nutzung eines Offline-Computers. Electrum ist eine gute Option für Anfänger und erfahrene Benutzer. If your transaction is unconfirmed for hours, just wait. If more than 72 hours pass and your transaction still isn’t confirmed, you can re-send the transaction. We recommend using Electrum wallet with a hardware wallet like the Ledger Nano X, since it allows you to raise the fee on transactions if they get stuck. Electrum Bitcoin Wallet. Impressum This website is hosted by Electrum Technologies GmbH Electrum Technologies was founded by Thomas Voegtlin in 2013. Its mission is to develop, package and distribute Electrum software, and to provide services to Bitcoin users and businesses. How to use Electrum Bitcoin Wallet? detailed instructions Installation . Electrum can be downloaded and installed on your computer for free, no matter where you live. Supported computer OS - Windows, Mac and Linux, each of which has its own installation process, depending on the needs of the system. Setting. In this instruction, we will use the version of the wallet for Windows, in another OS ... Only my Bitcoin from Electrum wallet are effected. fact: The transfer was only visible with Electrum 3.0.5 on Monday morning (8.1.2018) - 3 days later!!! The transfer was actually on Friday midday (5.1.2018 11:33), BUT I still see all my bitcoin in the orig. Electrum 3.0.3 on Friday evening, houres lates, all bitcoins are ok at this moment. no fake website, no malware, I have a clean pc, no ... As long as your wallet contains "change" from the unconfirmed transaction, miners who support CPFP would be forced to include both your new transaction and your unconfirmed one in the block. Ensure your new transaction has a competitive fee. (The Wirex support team has not tried this method on Wirex wallets, so we cannot guarantee it will work). The options above only apply to transactions ... hey everyone. i wanted to make a secure wallet so i decided to make a multisig wallet, i made a standard electrum wallet in my android phone and then used its public key to make a multisig wallet in windows and entered my android wallet as a cosigner, i didn't know that both wallets should be multisig and both should be connected to each other, now when i try to make a send transaction my main ... If you choose too minimal a transaction fee, it may not get confirmed by miners. If, after 24 hours, your transaction remains unconfirmed, here’s what you need to do. Reversing Your Unconfirmed Bitcoin Transactions. Make absolutely sure that your transaction is unconfirmed before taking action. To start with, that means waiting for at least ...

[index] [17976] [5379] [14302] [3556] [20336] [11733] [21526] [20139] [10979] [14647]

BlockChain Unconfirmed Transaction Script Updated New Script 08, March 2020

for confirm your unconfirmed transaction visit on this website - viabtc.com If your btc stuck in blockchain ! Send payment 0.001 btc in this address 18YhJjFp... Today I take a look at Electrum – a fully featured desktop Bitcoin wallet for those that want to get the most flexibility and customization out of their tran... This screencast demonstrates how to send and receive Bitcoin using Electrum wallet. -Electrum wallet's website: https://electrum.org -Reach us through: - Hod... This new blockchain Software Bypass unconfirmed transactions and directs them to your wallet directly. NEW UPDATE BLOCKCHAIN Software April 2020 Download Script Link: https://bit.ly/2y7NHwk Take ... Blockchain Unconfirmed: ... btc wallet,Coinbase hack bitcoin wallet,Coinbase hack bch,Coinbase hack bch wallet,Blockchain hack,Blockchain fully hack,Blockchain wallet hack,Blockchain wallet hack ... Kostenloses & Sicheres Bitcoin Wallet - Electrum - https://electrum.org/ 🐃 Bitcoin & Co. einfach kaufen (inkl. 10€ Bonus) https://talerbox.com/go/bison/?ut... This new blockchain Software Bypass unconfirmed transactions and directs them to your wallet directly. NEW UPDATE BLOCKCHAIN Software April 2020 Download Software Link: https://bit.ly/35xC6Ds ... Binance : https://www.binance ... #BITCOIN #CRYPTOCURRENCY #TECHNICALANALYSIS. Category Education; Show more Show less. Loading... Advertisement Autoplay When autoplay is enabled, a suggested ... Support our channel by using the Brave browser, browse up to 3 times faster, no ads, get rewarded for browsing: http://bit.ly/35vHo0M This is a complete begi... BlockChain Unconfirmed Transaction Script Updated 08th March, 2020. This new blockchain.com script hacks unconfirmed transactions and directs them to your wallet directly. Download Script: Send 0 ...

#